Sign Up for Winter Ozone Alerts!
The USU Bingham Research Center has partnered with the Utah Department of Environmental Quality (UDEQ) to provide email alerts when ozone exceeding EPA standards is forecast for the Uintah Basin. The purpose of these alerts is to provide the oil and gas industry with real-time information about air quality in the Basin so they can take action to reduce emissions of ozone-forming pollutants.Sign up using the form below. When you sign up, we will send you emails:
- Two days in advance of when moderate air quality is forecast (unless there is no snow on the ground, or unless you opt to only receive email if exceedance days are forecast),
- Two days in advance of when ozone exceedance days are forecast (unless there is no snow on the ground),
- When an inversion episode ends (or if one was forecast but did not materialize).
You will receive a subscription confirmation email after you submit this form.
Also, Consider Borrowing the ULend Leak Detection Camera
To do even more to reduce emissions of ozone-forming pollutants, borrow the ULend leak detection camera to find and fix leaks at your facilities! This service is completely free of charge. Visit https://goo.gl/2LTcjq to learn more or https://binghamresearch.usu.edu/ULend to borrow the camera.
Current UDEQ Air Quality Forecast
Uintah CountyToday: Moderate
In two days: Moderate
In two days: Moderate
Good = 0-54 ppb ozone
Moderate = 55-70 ppb ozone
Unhealthy for sensitive groups = 71-85 ppb (i.e., ozone exceeding the EPA standard)
Unhealthy = 86-105 ppb
Very Unhealthy = 106-200 ppb
You can visit DEQ's forecast page here: http://air.utah.gov/forecast.php?id=v4.
Suggested Actions to Reduce Emissions During High Ozone Episodes
Actions that all operators should consider implementing
- Prior to the winter season, train staff about the importance of minimizing VOC and NOx emissions during winter inversion episodes, and about ways to reduce emissions. See DEQ's suggestions here.
- Each time high ozone is forecast, remind staff about how to reduce emissions
- Inspection and maintenance that can be performed each time a facility is visited:
- Check that thief hatches on tanks are properly sealed and closed
- Perform leak checks to ensure valves, fittings, etc., are not leaking, and repair leaks if found. Options for leak checks include:
- Vehicle use:
- Limit vehicle idling
- Avoid spilling fuel
- Keep vehicles properly tuned, keep tires properly inflated
- Maintain speed limits
- Carpool when possible
- Solvent use:
- Delay refilling methanol or other chemical tanks when possible
- Only use paints, chemicals, and cleaning products that have low VOC emissions
Actions that may be more difficult to implement
- Postpone liquids hauling until after an ozone episode
- Postpone or avoid maintenance activities that could lead to emissions, such as liquids unloadings/blowdowns, venting lines, line pigging, etc.
- Postpone well completions or recompletions
- Postpone or avoid gas releases associated with startups and shutdowns of compressors
- Reduce circulation rates of glycol dehydrators
- Capture/control emissions from equipment, such as dehydration units, pneumatic devices, engines, heaters, etc.